https://www.XPOtool.com
Item 62541
Page 5
The Tool Experts
05 2022-1
•
Let a new grinding wheel spin for a minute before use to make sure that it is in good condition.
•
Do not operate the bench grinder without a protective device.
•
Do not use the grinder for cutting.
Warning!
Some of the dust generated from electrical grinding, sawing, sanding, drilling, and other work contains
chemicals known to cause cancer, birth defects, and other reproductive harm. Some of these chemicals
are
•
lead from lead paints,
•
crystalline silicon from brick, cement, and other masonry,
•
arsenic and chromium from chemically treated sawn timber.
The danger posed by these substances increases with the scope of this type of work. To minimise
exposure to them, you should only work in well-ventilated areas. Always wear approved safety equip-
ment to work, e.g., a respirator that can filter out microscopic particles.
Intended use
•
The machine is intended for roughing and brushing metal and stone materials without the use
of water.
•
It can be used for sharpening or practically any cutting tool: plane irons, chisels, gouges, lathe
tools, drills, etc. Care should be taken not to sharpen a tool too hard or for too long to avoid
overheating.
Technical specifications
Power supply
220–240
V, 50
Hz
Input power
(W)
120 (S
2
30
min)
Idle rotation speed
(
r
⁄
min
)
2950
Wheel size
(
㎜
)
⌀
150×16
Hole diameter
(
㎜
)
12.7
Sound pressure level
(
㏈
(A))
63
W
EAR
EAR PROTECTION
!
Sound power level
(
㏈
(A))
76
Vibrations
(
㎧
)
under 2.5
Weight
(
㎏
)
5
