https://www.XPOtool.com
Item 61581
Page 4
The Tool Experts
05 2022-1
materials. Wear a clean respiratory mask when performing work that creates fine or coarse dust
particles. When working for a longer period of time, wear a certified hearing protection.
•
Secure workpieces. Use clamps or a vice to keep the workpieces in position if possible. This is
safer than holding it by hand, as you have both hands to operate additional tools.
•
Do not lean too much over. Make sure to have a secure, firm stand and keep your balance at
all times.
•
Thoroughly maintain your tools. Keep your tools sharp and clean to ensure that these are relia-
ble and safe to work with. Follow the notes on lubrication and exchanging equipment. Keep the
handles dry, clean, and free of oil and grease.
•
Be aware. Focus on your work and always act on behalf of your best knowledge. Do not operate
devices, machines, or tools if you are tired.
•
Inspect the device for damaged parts before using a tool or device. Any part seeming to be
broken needs to be properly checked for its correct performance. Check the alignment of the
moving parts and ensure that they do not jam or have other damages. Make sure that no parts
are damaged or the performance is limited in any other way. All damages need to be repaired
or exchanged by a qualified person.
•
Spare parts and equipment. When repair work needs to be carried out, only identical spare parts
may be used. Only use equipment compatible with the device.
•
Do not use machines and devices under the influence of alcohol, medicaments, or drugs. Read
all safety information of the medicaments to know if your consciousness or reflexes are influ-
enced by them. If you have any doubts, you should not operate the devices or machines.
Assembly
1.
Push the connection piece
(19)
onto the
drive shaft 2
(17).
Make sure that the holes
are positioned in one line (see fig.).
2.
Push the handle
(15)
through the holes of
the connection piece and the drive shaft.
3.
Attach the connection with the taper
pin
(20)
to the drive shaft.
