21.Short press [DATA2] to enter the [SPD] submenu
22.Short press
[DATA1] repeatedly to scroll to the option [SPD ON].
23.Short press [DATA2] to scan for the speed sensor, in the meantime,
enable the speed sensor during the scanning. After paired, a set of speed
sensor device ID will be appeared on the screen.
24.If paired successfully. Short press
[Return] to confirm the setting and
return to the previous screen.
●
If not, short press [DATA2] to rescan the speed sensor.
25.Short press [Return] to return to the BIKE options.
To setup a Power Meter: Scroll through the BIKE options to [PWR].
Note: Leave the PWR OFF if there is no Power Meter installed on your bike.
In the [PWR] submenu, the options are:
●
OFF/ON: Un-pair / Pair the power meter with your Xplova E7
●
CALI: Calibrate the power meter.
●
DISP: Determine which power meter data to be displayed in the main
display screen.
36
24
24
25
21
22
23
in scanning
& pairing
Enter
Submenu
Enter
SCAN
Return
Rescan
Confirm &
setting
Select
SPD ON