Restarting Recording
During recording, long press
to start a new recording.
The Xplova E7 starts recording when it is powered on, if you want to reset the
time and distance from zero, you can long press
for 3 seconds, the
Xplova E7 starts countdown, stores the current record and displays the current
record number, e.g. R01 and then starts a new record, e.g. R02 immediately after
emitting the continuous beep sound.
Note:
Xplova E7 may not start a new record after long pressing
for 3 seconds, if the current speed is lower than the Smart-Pause speed limit.
However, once the Xplova E7 finds the current speed is higher than the Smart-
Pause speed limit, it resumes recording automatically.
Idle Mode
When no movement nor sensors are detected in 30 minutes, the Xplova E7
goes to idle mode to save power. In idle mode, only the battery icon and clock are
displayed. Press any buttons to return to normal mode or when speed is detected.
After being idle for 2 hours, the Xplova E7 automatically turns off.
18
Starts the new record R02
Countdown to store the
record R01
Long Press 3
sec.
In recording
New record R02
New record starts
New record number