Xplore 304, Руководство пользователя

Страница: 152 / 206

9-2
SECURITY
AL-KO SECURE WHEEL LOCK
(Option)
You must register your key, should you fail to
do this you will not be able to order a spare
key or obtain lost or stolen keys.
This is how it works:
• On the Al-Ko Secure registration card
you will find an exclusive security
number.
• Please register your key by telephoning
0870 7576788 or 0044 1926 818500.
• You will be required to provide the
chassis number of the caravan.
• You will need to provide us with a
password and supply answers to three
security questions.
• Make a note of your password and keep
it in a safe place.
• Also keep your registration card safe.
• Take your registration card with you when
you are travelling with the caravan.
• Always keep your registration card
separate from the lock.
Safety Information
• Always secure the caravan against
movement (chock the wheels, couple to
towing vehicle).
• Never leave Secure parts (key, locking
bolt, registration card) in the caravan.
• Always remove Al-Ko Secure before
moving the caravan.
• After any attempt at theft has been made
on a locked Al-Ko Secure, the caravan
must be inspected in an Al-Ko Approved
Service Workshop.
• Always keep the key in a safe place.
• Keep the lock set and registration card
separate from the keys.
• The lock parts and key do not have a
registration number, therefore keep the
registration card in a safe place.
• Caravans with twin axles have two locks,
keep each lock set in a separate place.
The sets are not interchangeable!
Note: Read the operating instructions and
act in accordance with them. Keep the
operating instructions for general use. Follow
the safety instructions as well as the warning
information.
ASSEMBLY
We recommend the use of a side-lift jack for
easier fitting of Al-Ko Secure when used on a
twin axle caravan. (Order No. Al-Ko Jack Set
1389235).
• Align the wheel so that the receiver can
be seen in the centre of the rim opening.
DO NOT use the rim opening in which
the tyre valve is fitted. (Fig. 1)
• Unscrew the plastic cap from the receiver
and store in the tool kit box. (When Al-Ko
Secure is not in use, always screw the
plastic cap in place). (Fig. 2)
• Insert the locking bolt into the rim specific
insert. (Fig. 3)
• Insert the locking bolt socket key. (Fig. 4)
• Line up the locking bolts and assembly
with the receiver. (Fig. 5)
• Tighten the locking bolt socket using the
wheel spanner provided (or ratchet as
shown) to wheel torque. (Fig. 6)
• Remove the locking bolt socket key.
(Fig 7)
• Insert barrel lock. (Fig. 8)
• Hold the lock fast and lock. (Fig. 9)
• The Al-Ko Secure is now fitted. (Fig. 10)