x0xio Installation
Product Name
x0xio
Instruction ver
1.06
Step 6 -
Power Supply(cont)
Use the 3” piece of 20AWG (thicker) green wire and connect pad C to R179 on the x0xb0x I/O
Board.
Step 7 -
Overdrive
Remove the wires connected to Pins 1 & 2 of J7 on the x0xb0x mainboard. Leave the other
end of the wires connected to the x0xb0x I/O board, they will be connected next:
Connect pad A to J7 Pin 1 on the x0xb0x I/O board. If you re-use the wires that are still
connected to J7 on the x0xb0x I/O board cut it to 3” length. If you removed the wires use a
3” piece of white wire.
Step 7 –
Overdrive(Cont)
Connect pad C to J7 Pin 2 on the x0xb0x I/O board. If you re-use the wires that are still
connected to J7 of the x0xb0x I/O board cut it to 3” length. If you removed the wires use a
3” piece of green wire:
Step 7 –
Overdrive(Cont)
Cut a 9” piece of yellow wire and connect pad B to J7 Pin 1 on the x0xb0x mainboard:
