Xoro HMB 1000, Руководство пользователя

Страница: 50 / 74

14
H
MB 1000
English
Connecting
Connecting with a VIDEO (CVBS) cable
The video (CVBS) cable transmits the signals for brightness
(Y-signal) and colour (C-signal) in a combined way. You
should only use this connection if no other connection type
can be used. Plug the adapter cable with the phone jack
into the
AV OUT socket on the rear side of your player.
The other side of the cable (RCA) must be connected to the
VIDEO input socket of the TV-set (usually labelled “VIDEO IN” or “AV IN”.
Please also refer to your TV set’s user manual). As VIDEO (CVBS) does not
transmit sound, you also must add an audio connection.
Insert one end of the supplied audio (Cinch [RCA]) cable with the white/red
RCA cable into the audio input socket (usually white/red) on the TV set (usually
labelled “AUDIO IN” or “AV IN”. Please also refer to your TV set’s user manual)
Switch on the TV set and select the s-video input or the respective channel
number. For channel number and input selection please also refer to your TV
operating instructions.
Insert the adapter cable into the AV OUT socket at the back of the player and
the other end of the cable with the RCA conntectors into the audio input socket
(usually white/red) on the amplifier set (usually labelled “AUX IN” or “Stereo IN”.
Please also refer to your Amplifier user manual). Switch on the Amplifier and
select the AUX or Stereo input.
Connecting to a Soundsystem or AV Receiver