Xoro HMB 1000, Руководство пользователя

Страница: 49 / 74

HMB 1000 13
English
Connecting
Connecting with a YUV (Y Pb Pr) cable
YUV (Y Pb Pr) is a transmission technology separating colour and brightness
information in the signal. Similar to RGB, the signals are transmitted on a 3 wire
cinch [RCA] cable. This way of transmission is also called “component”. This
connection offers best picture quality available with analogue signal transmis-
sion.
Plug the adapter cable into the
Y Pb P r labelled socket on
the rear side of your Multimedia player. You can recognize
the sockets by their colours red, green and blue easily. The
other side of the cable must be connected to the Y Pb Pr
input socket of the TV-set (usually labelled „Y Pb Pr“ or
„HDTV IN“.
Please change the video output in the Setup settings to
PAL 576i. In case, that your TV set supports progressive
Scan, you can choose the settings PAL 576p. If your TV set is compliant to HD
Ready, than you can uses the option 720p and than the player transmit a pro-
gressive signal to the TV set.
As YUV does not transmit sound, you also must add an
audio connection. Insert one end of the supplied audio/video
adapter cable (phone jack) into the socket
AV OUT at the
back of the player and the other end into the audio input
socket (usually white/red) on the TV set (usually labelled
“AUDIO IN” or “AV IN”. Please also refer to
your TV set’s user manual). Switch on the
TV set and select the YUV input or the
respective channel number. For channel
number and input selection please also
refer to your TV operating instructions.
Note:
Make sure you observe the colours of the three sockets when you establish the
connection. When the colours are connected in a wrong way, no picture or a
picture with wrong colours will be displayed.