XORAYA Minilogger Z7, Руководство пользователя

Страница: 74 / 202

U
SER
M
ANUAL
X
ORAYA
S
UITE
74
Setting Description Default
Protocol Raw , GNLog or DLT Raw
Enable Turn on logging for this channel On
Alias Freely selectable channel name rs232_# or
gnlog# or
DLT#
Bus ID Additional ID for subsequent evaluation
Use Busspec Load configuration template provided by
the vehicle manufacturer Off
Debug level** Detail level of the debug information
GNLog: 0 to 3 (max)
DLT: 0 (None) to 6 (Verbose) GNLog: 2
DLT: 0 (None)
Trace state*** Send trace messages Off
Verbose mode*** Off : Send only dynamic data
On : Send dynamic and static data
Off
Baudrate Transfer rate (in bit/s)
Values: 4800, 9600, 19200, 38400,
57600, 115200, 230400 115200
Bits Number of data bits of a data block
Values: 5 bit, 6 bit, 7 bit, 8 bit 8 bit
Parity Parity check for error detection
Values: None, Odd, Even None
Stopbits Number of stop bits that mark the end of
a data block
Values: 1 bit, 2 bit 1 bit
keep low level data
stream** Underlying RS-232 data are saved Off
Message Delimiter* Delimiter that marks the end of a message
Values: LF(10/0x0A) = end of line, None LF(10/0x0A)
Max packet size* Maximum packet size (in Bytes) 1000
RX Timeout* If no new character is received during this
period (in ms), then the previously
received data are interpreted as completed
message
0 : Function disabled
250
Prevent Sleep Mode Minilogger Z7 will not go into sleep mode
as long as there is activity on this channel On
Wake* Minilogger Z7 wakes up from sleep mode
as soon as there is activity on this channel On
* Only for Raw **Only for GNLog and DLT ***Only for DLT