XORAYA Minilogger Z7, Руководство пользователя

Страница: 34 / 202

U
SER
M
ANUAL
C
OMMISSIONING
34
4.7 Configuring terminators
 Configure the built-in terminators via the rotary switches (M) on the
back of the Minilogger Z7. (

Connections and controls)
 For the LIN interface, select between internal or external power supply
via the toggle switch
(P)
4.7.1 4x CAN
Position Resistance
0 Open (∞)
1 2.6 kΩ
2 120 Ω
The channels 3 and 4 have the value Open and, therefore, are not
terminated.
4.7.2 1x Dual-FlexRay
Position Resistance
0 Open (∞)
1 2.6 kΩ
2 90 Ω
There are two variants of the label: FR-2/1 and FR-B/A
4.7.3 7x LIN
Position Power supply
Vi Internal
Ve External
Use the internal power supply of the LIN measurement card only if the
connected LIN device uses the Minilogger Z7 voltage as a reference voltage.
Bear in mind that this is not possible when using the Minilogger Z7 in a 24-V
electrical system, for example. In this case, connect the external power
supply port to the corresponding reference voltage.