XONTEL XT-23G Скачать руководство пользователя

Страница: 160 / 166

Upgrade

To upgrade via HTTP,

the “Management”-> “auto provision” -> “Firmware Upgrade”-> “Upgrade Mode”

field needs to be set to HTTP, respectively.

“Firmware Server Path” needs to be set to a valid URL of a

HTTP server, server name can be in either FQDN or IP address format. Here are examples of some

valid URL.

Instructions for firmware upgrade via HTTP:

(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use

Microsoft IIS web server. Then setup HTTP server.

(2) Unzip the firmware file and put all of them under the

root

/fm directory of the HTTP server.

(3)

Visiting “http://192.168.0.254/fm/fw924.rom on localhost by browser” to verify the HTTP Server. If

visiting “http://192.168.0.254/fm/fw924.rom on another computer and it not prompted to download

fw924.rom file on this computer, please check if the firewall is on or off (Suggest you turn off the

firewall).

To configure the server path via Web interface:

1. Click Management

→

Auto provision:

2. Select the upgrade mode in the Upgrade Mode field

3. Enter the Firmware Server Path and Config Server Path (192.168.0.254 is HTTP server).

Enter the HTTP server’s username and password (optional).

5. Click the

button to save the configuration.

6. Restart the XT-23G, IP Phone will restart and auto-get firmware files from HTTP server.

Содержание XT-23G







































































































































































Результаты поиска

Содержание XT-23G

Отзывы:

Похожие инструкции для XT-23G

Бренды по названию

Популярные бренды

XONTEL XT-23G, Руководство пользователя

Результаты поиска

Содержание XT-23G

Отзывы:

Похожие инструкции для XT-23G

Бренды по названию

Популярные бренды