XONTEL S3200-FXS Скачать руководство пользователя страница 38

Страница: 38 / 68

configure the tone zone settings on S3200-FXS Gateway:

Figure 8-3 Customize Tones

Table 8-1 Description of Tone Zone Settings

Items

Description

Country/Region

Choose the country to get pre-programmed tone zone settings or

choose "User custom for Tone Zone" to configure the settings

manually.

Ring Cadence

Configuration option for all FXS ports ring cadence for all

incoming calls.

Dial Tone

Prompt tone of off-hook dial tone.

Ringback Tone

The tone sent to caller when ringing is on.

Busy Tone

Used for busy line prompt.

Call-Waiting Tone

Used for notification in call waiting.

Congestion Tone

Used to indicate that an invalid code has been dialed, or that all

circuits (trunks) are busy and/or the call is unroutable.

2nd Dial Tone

Used for the second stage dial tone.

Message Tone

Used for message tone.

VoiceMail Tone

Used for voicemail tone.

RADIUS Settings

TA FXS Gateway supports RADIUS (Remote Authentication Dial in User Service)

protocol. RADIUS feature is mainly for billing purpose on S3200-FXS Gateway. There

are primary and secondary RADIUS server configurations available. Once the primary

server is unreachable, the RADIUS requests will be sent to the secondary server.

Содержание S3200-FXS





































































Результаты поиска

Содержание S3200-FXS

Отзывы:

Бренды по названию

Популярные бренды

XONTEL S3200-FXS, Руководство пользователя

Результаты поиска

Содержание S3200-FXS

Отзывы:

Бренды по названию

Популярные бренды