XONTEL S3200-FXS Скачать руководство пользователя страница 17

Страница: 17 / 68

DND

Don’t Disturb. When DND is enabled for an extension, the

extension will not be available.

Ring Timeout

Check this option if you want to customize the ring time. Ring

tone will stop over the time defined.

Volume Settings

Rxgain

Adjust receive gain.

Txgain

Adjust transmit gain.

Caller ID Settings

Caller ID Signalling

choose the Caller ID signaling:

FSK

DTMF.

Sending Mode

choose the Caller ID Sending mode:

Ring + Caller ID + Ring

Caller ID + Ring

Po Caller ID + Ring

Note:

if the FXS port is connected to a device’s FXO port,

Caller ID settings on FXS port and FXO port should be the

same, or the call cannot be established.

Caller ID Type

choose the Caller ID Type:

Bell-USA

V23-UK

V23-NTT Japan

Fax

Enable T.38

If the FXS port is connected to a Fax machine, this option

should be checked.

MWI Settings

Subscribe for MWI

Message Waiting Indicator (MWI) refers to a special LED on

the analog phone, which indicates the voice mail status.

MWI Light Option

There are three lighting methods supported on S3200-FXS

Gateway: neon, FSK and Polarity. Choose the lighting method

according to your phone. S3200-FXS Gateway will light the

lamp up once receiving a new message; the lamp will

goes off if there is no unread voice mail.

Polarity Settings

A polarity signal is required on some systems for reverse polarity billing. Select if

reverse polarity signal is activated on this FXS port. It is not activated by default.

Polarity Answer: Whether to send polarity signal while picking up the phone.

Polarity Hangup: Whether to send polarity signal while hanging up the phone.

Hunt Group

Hunt group is a feature that allows a call reaching multiple FXS ports. The FXS ports

will act as a single group, called a hunt group. The number of hunt groups is limited by

Содержание S3200-FXS





































































Результаты поиска

Содержание S3200-FXS

Отзывы:

Бренды по названию

Популярные бренды

XONTEL S3200-FXS, Руководство пользователя

Результаты поиска

Содержание S3200-FXS

Отзывы:

Бренды по названию

Популярные бренды