XONTEL S3200-FXS, Руководство пользователя

Страница: 15 / 68

15
General
Caller ID Name A character-based name for this user. For
example, Bob Jones.
Caller ID Number The Caller ID string used when this user calls
another user.
VoIP Serer
Template
VoIP Server
Choose a VoIP server, where the account will be
registered.
User Name User name provided by VoIP server.
Authentication
Name
Authentication name provided by VoIP server.
Password
Authentication password provided by VoIP
server.
From User
Provided by VoIP server. Keep this field blank if
not needed.
Route
Settings
Dial Pattern
Template
The account will be allowed to make outbound
calls according to the selected template.
DID Number
Defines the expected DID number if this trunk
passes DID on incoming calls. Leave this field
blank to match calls with any or no DID info.
Hotline
Enable Hotline
Select whether to use Hotline or not. Hotline is
disabled by default. If this feature is enabled, the
system will dial out the hotline number
automatically after off-hook.
Hotline Number
Set the number to dial out automatically after
off-hook.
Delay Dial
Define how long to make Hotline take effect after
you pick up the phone.
Flash
Send Hook Flash
Event
If the option “Send Hook Flash Event” is set to
“Yes”, when pressing the flash key on the analog
phone during an active call. TA will send a SIP
DTMF flash event to the VoIP server. It can be
an interoperation with a FXO gateway which is
used for informing FXO gateway to generate the
flash signal to the CO line.
Min Flash Time
Sets the minimum time the phone is on hook
before being detected as a hook flash.
Max Flash Time
Sets the maximum flash time.
Call Duration Setting
Setup the max cull duration for every call of this
user, but it’s only valid for outbound calls.
Note : this setting will not be valid for internal
calls.
Echo Cancellation Setting
To disable or enable echo cancellation. If the line
is used to connect POS machine, it is suggested
that echo cancellation is disabled.