XONTEL S3200-FXS Скачать руководство пользователя страница 22

Страница: 22 / 68

accounts.

Template Register: ports will register to this server with the

same account.

Service Provider: disable registration.

Advanced

Table 5-2 Description of VoIP Server Advanced Settings

Items

Description

Enable SRTP

Define if SRTP is enabled for this VoIP server.

Qualify

Send check alive packets to the SIP provider.

Caller ID

Specify the caller ID to use when making outbound calls over

this VoIP server.

Maxmum Channels

Control the maximum number of simultaneous calls. Set as 0

to specify no maximum.

Realm

Realm is a string to be displayed to users so they know which

username and password to use.

Authenticating

Incoming Call

When an incoming call reaches S3200 FXS-Gateway device

and sends INVITE packet to S3200-FXS Gateway, S3200-FXS

Gateway responds 401, but the Realm info in 401 Response

does not match the Realm set on S3200-FXS Gateway VoIP

Server, the provider will refuse to authenticate. If you set this

option to No, TA will not reply a 401 Response to the provider

authenticate the incoming call.

DTMF Mode

Set default mode for sending DTMF of this trunk. Default

setting: rfc2833

Codec

Define the codec for this sip trunk and its priority. S3200-FXS

Gateway supports the following codec: u-law, a-law, G726,

G729A/B,

GSM, ADPCM, G722, G723, iLBC.

Dial Pattern Template

Dial pattern template specifying how to route the calls from FXS ports to VoIP server

extensions or external numbers. The number of dial pattern templates is limited by the

number of ports each S3200-FXS Gateway model has.

Содержание S3200-FXS





































































Результаты поиска

Содержание S3200-FXS

Отзывы:

Бренды по названию

Популярные бренды

XONTEL S3200-FXS, Руководство пользователя

Результаты поиска

Содержание S3200-FXS

Отзывы:

Бренды по названию

Популярные бренды