- 9 -
INSTALLATION INSTRUCTIONS
INSTALLATION - VENTED TO THE OUTSIDE
1. FIXING THE HOOD TO THE LOWER
PART OF THE WALL CABINET:
This type of appliance must be fitted inside
a cabinet or inside another type of support
structure. The overall measurements of the
range hood are given in
figure 1-2
. Before
proceeding with range hood installation,
remove grille
D
by pressing the two side
buttons
A
, as shown in
figure 3
.
Fix the appliance in place using 8 screws
(not supplied) which are suited to the
type of cabinet. To install the range hood
correctly, first fit the 4 screws
A
and then
the 4 screws
B
, in accordance with the
diagram in
figure 4
. After fixing the range
hood to the lower part of the cabinet, place
grille
D
(Fig.4)
back in the correct position.
During this procedure, make sure that
grille
D
is fastened properly.
The appliance expels the fumes through
an outside wall or a duct. It is necessary to
buy a telescopic pipe in accordance with
the standards in use (inflammable) and
connect it to flange
H
(Fig.5)
.
IMPORTANT - The range hood must
be secured to wall studs or use drywall
anchors capable of supporting 75 lbs.
Fig.2
Fig.1
Содержание XOI21SMUA
