XMOS xCORE-Analog sliceKIT, Руководство по оборудованию

Страница: 25 / 34

xCORE-Analog sliceKIT Hardware Manual 25/33
PCIE A (BOT) SIGNAL FUNCTION
A1 NC NOT CONNECTED
A2 5V POWER SUPPLY 5V
A3 X0D13 P1F0
A4 WAKE SYSTEM WAKE SIGNAL (X0D43)
A5 GND POWER SUPPLY GROUND
A6 ADC4 ADC CHANNEL 4
A7 ADC5 ADC CHANNEL 5
A8 GND POWER SUPPLY GROUND
A9 ADC6 ADC CHANNEL 6
A10 GND POWER SUPPLY GROUND
A11 GND POWER SUPPLY GROUND
KEY KEY MECHANICAL KEY
A12 NC NOT CONNECTED
A13 NC NOT CONNECTED
A14 GND POWER SUPPLY GROUND
A15 NC NOT CONNECTED
A16 RST_N SYSTEM RESET (ACTIVE LOW)
A17 ADC7 ADC CHANNEL 7
A18 GND POWER SUPPLY GROUND
2.10.7 System Services Slot Signals
On all Slots, TDO is always out of the sliceKIT Core Board, TDI is always in to the
Core Board.
MSEL, TCK, TMS, RST_N are all inputs to the Core Board from the
Chain
Connector
and outputs from the Core Board on the
Square
Slot.
DEBUG is bidirectional.
PRSNT is used on the
Chain
Connector to detect it is plugged into the
Square
Slot
of another Core Board. This signal is used to switch JTAG and CLK sources.
Similarly, PRSNT_N is used on the
Star
Slot to detect another Core Board is
connected. This signal is used to switch the JTAG chain signals.
CLK and RST_N are inputs to the Core Board from the
Chain
Connector and output
from all Slots.
XM005221A