Xirrus XR Series, Быстрое руководство по установке

Страница: 7 / 18

XR Series Wireless Arrays
5

2.
Use the three screws provided in the accessory kit to attach
the locking plate to the XR-600 mounting plate as shown.
NOTE: Use only the screws provided in the accessory kit. Other
screws that may appear equivalent in size may damage the XR-
600 mounting plate.
3.
If using a T-Bar bracket for a standard ceiling grid, just twist
the built-in clips onto the grid with the bolts facing down. For
a slotted grid, slide the T-bolt heads into the grid's slot (easiest
to do at an intersection), position them for the two holes in the
T-Bar Bracket, and twist bolts till snug in the slot. Secure
bracket with nuts, bolts pointing down.
Attach the Mounting Plate to bracket with supplied nuts. Skip
the next 2 steps.
4.
If using T-Bar clips, use the four holes on the XR-600
mounting plate to mark the placement of the four T-bar clips
on the metal ceiling support grid.
NOTE: You MUST use the mounting studs furnished with the T-
BAR accessory kit. You cannot use old T-bar clips from XN or XS
Arrays with the XR Series. The new clips have studs that are
painted white—don’t use old clips that have studs that are not
white.