Xirrus XR Series, Быстрое руководство по установке

Страница: 3 / 18

XR Series Wireless Arrays
1
Quick Installation Guide
For XR-600 Models
The XR-600 Series Access Point (AP) is a new class of low
cost, zero touch AP within the Xirrus wireless portfolio.
With two 802.11ac radios, a powerful integrated controller,
application-level intelligence, automated provisioning,
and cloud management (optional), the XR-600 delivers
robust wireless connectivity in areas of low-to-medium user density.
This Guide covers the steps required to install the XR-600 on a ceiling or wall and connect and
start the AP. For detailed configuration information, see the
Wireless Array User's Guide .
You Need the Following Items

Power and Ethernet connection(s) to your wired network using Cat 5e or Cat 6 cables. The
XR-600 Series has two Gigabit Ethernet ports:

GIGABIT1/PoE+
—
This port powers the AP via Power over Gigabit Ethernet (PoGE)
over a Cat 5e or Cat 6 cable that also carries data traffic. Power is provided by an 802.3at
PoE+ compliant switch or a Xirrus-supplied PoGE injector—the 30W XP1-MSI-30, or
current models rated at 70W or higher. If using an injector, you must provide a data
connection from the switch to the injector as well as another cable from the injector's
OUT port to the GIGABIT1/PoE+ port. PoGE Injectors require an AC outlet. See the
PoGE Installation Guide for more information.

(Optional) GIGABIT2
—
Connection to this second, data-only Gigabit port provides
additional bandwidth. Use Cat 5E or Cat 6 cable.
NOTE: The XR-600 must be connected to PoGE networks without routing cabling to the outside
plant. This ensures that cabling isn’t exposed to lightning strikes or possible crossover from
high voltage lines. Xirrus PoGE Injectors or Switches and XR-600 APs must be installed and
used indoors.

Workstation with a Web browser to configure the XR-600 via Xirrus XMS/ Mobilize or
directly via the Windows Management Interface (WMI).

Ceiling Mount
—
you may mount directly to a ceiling. Use two user-supplied screws that are
appropriate for the construction material of the ceiling (we recommend max screw size #8,
Pan Head type). See
“Direct Mounting Template” on page 13 .
Suspended Ceiling Grid Mount
—
you may mount directly to a 15/16” standard grid with no
accessories. For other grid types, or for easy detachment plus the ability to lock the unit in
place, use a mounting plate (XE-500-MOUNT, below). You also need T-Bar clips (ordered
1