Capture Frame Rate
– You can select different frame rates per second for the video
capturing. The more the frames per second, the more lifelike video you will get. But
this will also increase the mail size that takes the recipient longer time to download.
Video Compression Quality
– You can change the quality from low to high by
moving the bar from left to right. The higher the quality, the longer time it will take
to compress your video but you will have a much clear video image.
Send Mail Settings
-- There are two options you can make from this setting:
Don’t send decode driver
– a check on this box will enable you to send only
the captured video mail(data file), without any C-it decode driver.
NOTE
: If you are sending the mail to someone who didn’t have the OpArt
Video Mail software previously installed, DO NOT check the box. If the
person has OpArt Video Mail installed or has received your OpArt Video
Mail (with decode driver) before, you can check that box, to minimize the
mail size and thus speed up the transmission time.
Ask for document name when sending Email
– a check on this box will enable
you to give the captured video mail a name when you send the mail out.
x
Close OpArt Video Mail application
NOTE
: If you close the application without sending or
saving the message, you will lose it when program
exists.
