8
2.
Camera Cabling
Before users connect cables, make sure that all cables and the power adaptor
are placed in dry and well-waterproofed environments, e.g. waterproof boxes.
The purpose is to prevent moisture accumulation inside the camera and
moisture penetration into cables, which might lead to device breakdown. Please
follow the instructions below to complete camera connection.
2.1
Connect Ethernet Cable
Refer to the type of camera and follow the instructions below to connect
Ethernet cable.
2.1.1
Indoor Camera
The Ethernet connector of the indoor camera is shown as below.
PoE Connection
Connect one end of the Ethernet cable to the RJ-45 connector of the indoor
camera, and plug the other end to a PSE switch. Check the status of the link
indicator and activity indicator LEDs. If the LEDs are unlit, please check the LAN
connection.
NOTE:
Please use an Ethernet cable without the boot cover to connect
the indoor camera. Otherwise, the dome cover cannot be installed.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
