13
Part Number
18150, E, 02/07/2018
Press CO Alarm against mounting surface and turn clockwise, approximately 25°.
After installation is complete, attach one of the enclosed “Warning” stickers to the wall next to
the alarm. Place the other sticker near a source of fresh air where you would gather after an
alarm indicates the presence of carbon monoxide. The phone numbers of emergency services
and qualified technicians should be added to the stickers.
NOTE:
USE 18 GA WIRES IN ACCORDANCE WITH NATIONAL ELECTRICAL CODES FOR ALL WIRED
CONNECTIONS.
Power Connections (CMD5-RD, CMD5-RDI, CMD5-RD-B & CMD5-RDI-B)
Red and Black 18 GA wires are provided for connecting to the power source. Connect the Red
wire to Power (+). Connect the Black wire to Ground (-).
Red (+ VDC)
+9 to 32 VDC
Battery Ground
Black (Ground)
