11
Part Number
18150, E, 02/07/2018
NOTE:
DURING EOL RESET THE UNIT WILL GO THROUGH A SELF-DIAGNOSTIC PROCESS FOLLOWED BY
THE TEST SEQUENCE.
Locating a Xintex Carbon Monoxide Alarm
Because of the high risk of carbon monoxide injuries due to the nature of recreational vehicles, we
recommend a carbon monoxide alarm be installed in the main accommodation area and in each
sleeping area of the recreational vehicle. Small recreational vehicles with an open design may
only require one CO Alarm for adequate protection. If any two sleeping areas are partitioned,
then one CO Alarm should be installed in each sleeping area installation should be at eye level
height for convenient monitoring and service. Ordinary thermostat height is adequate. Ceiling
installation is also allowed.
DO NOT install a CO Alarm near a door or window through which water could be sprayed or
spilled on the device.
DO NOT install in locations where temperature, moisture, and/or ultraviolet light affect the
operation.
DO NOT install in locations where the normal ambient temperature is below -40
o
C (-40
o
F) or
exceeds 70
o
C (158
o
F)
DO NOT mount within one foot of corners or other ‘dead’ air spaces.
DO NOT locate CO Alarm within 5 feet (1.5 m) of any cooking appliance or in direct airflow from
air conditioning or heat vents.
DO NOT locate CO Alarm in close vicinity of curtains, pillows, or other obstructions.
Recommended Locations
Bedroom
Dinette
Bath
Kitchen
