V5 series inverter
29
When the inverter is in the stopping state, it will running according to jog frequency (refer to P3.06~P3.08 for details)
after receiving jog running command (e.g after pressing
key)
1
1
1
1
：
Close
Close
Close
Close loop
loop
loop
loop
If the close loop running function is enabled (P7.00=1), the inverter will enter the close loop running modes, that is, it
will perform PI adjust according to the reference and feedback value (refer to parameters in group P7), PI adjuster
output is the essential command of inverter’s output frequency. Close loop running can be disabled by multi-function
terminal (No.27 function) and the inverter will be in a running mode with lower priority.
2
2
2
2
：
PLC
PLC
PLC
PLC running
running
running
running
If PLC function is enabled (Unit’s place of P8.00 is set to a non-zero value), the inverter will enter PLC running mode
and running in the pre-defined running mode (refer to parameter description in group
P8). PLC running can be
disabled by multi-function terminal (No.29 funcition) and the inverter will select a running mode with low priority.
3
3
3
3
：
Multi-speed
Multi-speed
Multi-speed
Multi-speed running
running
running
running
Select Multi-frequency 1~7 (P3.26
～
P3.32) to realize multi-speed running by no-zero combination of multi-function
terminal (No.1, 2 and 3 functions)
4
4
4
4
：
Common
Common
Common
Common running
running
running
running
Common running is actually the open loop running mode.
Fig.
Fig.
Fig.
Fig. 3-1
3-1
3-1
3-1
Running
Running
Running
Running state
state
state
state of
of
of
of V5
V5
V5
V5
Except “Jog running”, other 4 kinds running modes can be enabled by multi-frequency setting method. Besides, “PLC
running”, “multi-speed running”, “common running” can be used as traverse frequency.
3-2.
3-2.
3-2.
3-2. Use
Use
Use
Use the
the
the
the keyboard
keyboard
keyboard
keyboard
3-2-1.
3-2-1.
3-2-1.
3-2-1. K
K
K
Keyboard
eyboard
eyboard
eyboard layout
layout
layout
layout
Start, speed, stop, brake, running parameter setting and control of the peripheral can be performed by inverter’s operation
