OWNER’S/OPERATOR’S
MANUAL
16. MAINTENANCE
16- 13
WHEELS AND TIRES
WARNING
Operating your UTV with worn tires, improperly inflated tires, non-standard tires or
improperly installed tire will affect vehicle handling which could cause an accident
resulting in serious injury or death.
Follow the safeguards listed below to prevent this type of situation.
Important Safeguards
Maintain proper tire pressure according to charts below. Improper tire inflation may
affect UTV maneuverability.
Do not use improper tires. The use of non-standard size or type tires may affect UTV
handling.
Make certain the wheels are installed properly. If wheels are improperly installed it
could affect vehicle handling and tire wear.
Tire Pressure
front
rear
48kPa/7SI
48kPa/7PSI
Wheel Removal Procedure
1. Stop the engine, place the transmission in gear and lock the parking brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the footrest
frame.
4. Remove the wheel nuts and remove the wheel.
Wheels Installation
1. With the transmission in gear and the parking brake locked, place th wheel in the
correct position on the wheel hub. Be sure the valve stem is toward the outside and
totation arrows on the tire point toward forward rotation.
2. Attach the wheel nuts and fingertighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts according to the chart found in “
16.
MAINTENANCE/ Wheel Nut Torque
”.