OWNER’S/OPERATOR’S
MANUAL
9. VEHICLE BREAK-IN PERIOD
9-1
The break-in period for your new UTV is defined as the first 50 hours of operation.
No
single action on your part is as important as a proper break-in period. Careful
treatment of new engine will result in more efficient performance and longer life for
the engine. Perform the following procedures carefully.
CAUTION
Do not operate at full throttle or high speeds for extended periods during the break-in
period. Excessive heat can build up and cause damage to close fitted engine parts.
1. Fill fuel tank.
2. Check oil reservoir level indicated on dipstick. Add oil if necessary.
3. Drive slowly at first. Select an area which is open and will give you room to
familiarize yourself with vehicle operation and handling.
4. Vary the throttle positions. Do not operate at sustained idle.
5. Perform regular checks on fluid levels, controls and all important areas on the
vehicle as outlined earlier on the daily pre-ride inspection checklist found in”
4.daily pre-ride inspection ”.
6. Don’t pull loads.
7. Break-in oil and filter. Change at 20 hours or 500 miles/800km.
