Remove the oil pump driver gear.
Remove the movable drive face cover.
Remove the movable drive face plate and O-ring.
Remove the 6 pcs of rollers
Note: when reinstalling rollers, apply grease to sliding
surface of rollers.
Using the special tool, remove the clutch shoe nut
by turning it clockwise.
Using screw driver remove the movable driven face seat.
Caution: when reinstalling the driven face seat, degrease the
outer surface of the driven face seat completely.
Remove the three pins from the fixed driven face.
Note:
Apply grease to the sliding surface between fixed driven face
and movable driven face.
When reinstalling the movable face to fixed face, make sure
that oil seal should be positioned properly.
- 15 -
