Xilinx Zynq-7000 Скачать руководство пользователя страница 9

Страница: 9 / 50

ZC702 and ZVIK Getting Started Guide

www.xilinx.com

UG926 (v6.0) December 17, 2013

ZC702 Evaluation Kit Contents

Node-locked, device-locked to the Zynq-7000 XC7Z020 CLG484-1 device

• Board design files

Schematics

Board layout files

Bill of materials

• Documentation

ZC702 Evaluation Kit and Video Imaging Kit Targeted Reference Design

Documentation Advisory

• Reference Designs and Demonstrations

BIST Utility and Demonstration

Targeted Reference Design (TRD), demonstrating a video processing pipeline.

Note:

The video demonstration contains the licensed IPs with no timeout. To recompile this

design, the user needs to register for an evaluation IP license for the Video IP.

AMS demonstration, providing an overview of the analog capabilities of the

Zynq-7000 AP SoC devices.

• 12V AC adapter power supply
• Cables

RJ-45 Ethernet cable

HDMI cable

USB Type-A to USB Micro-B cable (Digilent USB-to-JTAG Programing Port)

USB Type-A to USB Mini-B cable (serial UART)

USB Micro-B to female A adapter (for connecting USB hub, keyboard, and mouse)

• Secure Digital Multimedia Card (SD MMC) (contains bootable configuration files for the

Base TRD demonstration design files and Linux platform applications)

The kit contains the software and reference designs, a demonstration, and documents to

help the user get started quickly.

For reference design files, documents, and board source files, go to the

Zynq-7000 AP SoC

ZC702 Evaluation Kit documentation page

Send Feedback

Содержание Zynq-7000



















































Результаты поиска

Содержание Zynq-7000

Отзывы:

Бренды по названию

Популярные бренды

Xilinx Zynq-7000, Руководство по началу работы

Результаты поиска

Содержание Zynq-7000

Отзывы:

Бренды по названию

Популярные бренды