Xilinx ZC702 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 52

background image

ZC702 and ZVIK Getting Started Guide

www.xilinx.com

31

UG926 (v3.0.1) February 12, 2013

Base TRD Hardware Setup Requirements

the display monitor should support 720p resolution: 1280 x 720p @ 60 Hz. If an HDMI

monitor is not available, a DVI monitor can be used, but an HDMI to DVI-D

cable/connector adapter is required (not included with the kit). The connector adapter

can be easily obtained at most electronic retailers or through a variety of online

sources.

Instructions for running the demonstration at 720p are provided in

Running the Video

Demonstration for 720p Video Resolution, page 41

.

Note:

The example mentioned in this package has been tested with a Dell model #P2412H

display monitor. However, the example should work well with any HDMI-compatible display

device.

• For the ZVIK, if running with an external video input source is desired, use the

FMC-IMAGEON HDMI input/output FMC module to connect an external video source.

An HDMI video source is required to provide the external video input. If an HDMI

source is not available, a DVI source can be used, but an HDMI to DVI-D

cable/connector adapter is required (not included with the kit). The connector adapter

can be easily obtained at most electronic retailers or through a variety of online

sources. The external video source must be 1080P 60 Hz and must not deliver content

with copy protection or Digital Rights Management (DRM) enabled. Many DVD and

media players output content with DRM enabled even if the content is not DRM

protected. A laptop or other source is recommended.

Note:

This TRD does not support input from the camera provided in the ZVIK. Check the ZVIK

product web page

www.xilinx.com/ZVIK

for additional designs and resources.

Note:

When connecting an external video source to the FMC card:

• Connect the source only after the bit file is programmed. Connecting the source only

after system boot-up is recommended.

• Ensure that the source resolution is set to the same resolution used by the demo (1080p

or 720p) as configured by the files on the SD card. See

Running the Video

Demonstration for 720p Video Resolution, page 41

for more details.

• Ensure that the refresh rate for the source is set to 60 Hz.

«
...
29
30
31
32
33
...
»

Содержание ZC702





















































Отзывы:

Нет отзывов

Похожие инструкции для ZC702

Бренд: wattio Страницы: 20

TEMP2000 Series

Бренд: Samwontech Страницы: 91

Бренд: u-blox Страницы: 2

Бренд: +GF+ Страницы: 3

Бренд: Linear Technology Страницы: 7

J1000 CIMR-JC series

Бренд: YASKAWA Страницы: 25

Бренд: Atari Страницы: 3

Бренд: Contemporary Research Страницы: 22

ESP32-C3 Series

Бренд: Espressif Systems Страницы: 30

Бренд: IFM Страницы: 41

RSF-B mini Series

Бренд: Harmonic Drive Страницы: 32

Latherm HZR Comfort

Бренд: LAMBERTI ELEKTRONIK Страницы: 16

Touch Screen Controller SX112

Бренд: 3M Страницы: 33

Бренд: Hoffer Страницы: 57

GLOFA G7M-DR20U

Бренд: LS Industrial Systems Страницы: 367

AUTOMATIONWORX IBS PCI SC/I-T

Бренд: Phoenix Contact Страницы: 80

Бренд: Gardenic Страницы: 14

Бренд: VADDIO Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды