Xilinx ZC702 Скачать руководство пользователя страница 30

Страница: 30 / 52

Chapter 3:

Getting Started with the Base Targeted Reference Design

www.xilinx.com

ZC702 and ZVIK Getting Started Guide

UG926 (v3.0.1) February 12, 2013

Base TRD Hardware Setup Requirements

These items are required to run and test the Base TRD and the video demonstration:

• The ZC702 evaluation board with the XC7Z020 CLG484-1 part
• USB Type-A to USB Mini-B cable (for UART communications) and a Tera Term Pro (or

similar) terminal program

[Ref 8]

• USB-UART drivers from Silicon Labs

[Ref 9]

• AC power adapter (12 VDC)
• An HDMI cable (two cables if using the ZVIK and the user desires to use an external

video source for the demonstration)

• SD MMC flash card containing TRD binaries formatted with FAT32

Note:

The included SD MMC is pre-loaded with required binaries. The binaries are loaded into

the first partition of the SD MMC card and include:

BOOT.bin

devicetree.dtb

devicetree1080p.dtb

devicetree720p.dtb

uImage

uramdisk.image.gz

qt_lib.img

init.sh

run_sobel.sh

sobel_cmd

sobel_qt

images

Note:

The default binary device tree

devicetree.dtb

is for configuring the video-out

resolution to 1080p. Additionally, the binaries should be loaded at its root level. If the files are

not loaded on the SD card, copy the files from the

sd_image directory

to the SD card.

• USB Micro-B to female A adapter
• A USB hub is needed for connecting a keyboard and mouse (not included with the kit).

If a USB hub is not available, it is still possible to run the demonstration with only a USB

mouse, but the user will not be able use the frame buffer console terminal that will

come up once the user exits the demo.

• USB mouse and keyboard (optional—not included with the kit)
• An HDMI-compatible display monitor that supports full HD resolution: 1920 x 1080p

@ 60 Hz (not included with the kit). If the user wants to test at 720p video resolution,

Содержание ZC702





















































Результаты поиска

Содержание ZC702

Отзывы:

Похожие инструкции для ZC702

Бренды по названию

Популярные бренды

Xilinx ZC702, Руководство по началу работы

Результаты поиска

Содержание ZC702

Отзывы:

Похожие инструкции для ZC702

Бренды по названию

Популярные бренды