Xilinx Virtex-II Pro ML324, Руководство пользователя

Страница: 8 / 24

8 www.xilinx.com Virtex-II Pro ML324 and ML325 Platform
UG063 (v1.2) May 30, 2006
Conventions
R
Conventions
The voltage range names used on the ML32 x platform differs from those shown in the
Virtex-II Pro Platform FPGAs: Complete Data Sheet (DS083) at
http://direct.xilinx.com/bvdocs/publications/ds083.pdf
They correspond as shown in Table 1 :
Introduction
The ML32 x platform allows designers to investigate and experiment with the features of
RocketIO transceivers. This document describes the features and operation of the boards.
The platforms and their corresponding packages are shown in Table 2 .
Features
•
Virtex-II Pro FPGA
•
On-board power supplies for all necessary voltages capable of supplying 3A each
•
Power supply jacks for optional use of external power supplies
•
JTAG configuration port for use with Parallel Cable III and Parallel Cable IV cables
•
System ACE configuration controller
•
RS-232 serial port
•
Two 125-MHz or 156.25-MHz differential clock oscillators
•
Two 2.5V clock oscillator sockets
•
Four differential clock pairs with SMA connectors
•
Two single-ended clocks with SMA connectors
•
One pair of 36-position headers with ground headers for parallel BERT cables
•
16 or 32 pairs of SMA connectors for the RocketIO transceivers
•
Power indicator LEDs
•
General purpose DIP switches, LEDs, and push buttons
•
128 Mb SDRAM
Table 1: Voltage Range Names
Data Book Board Data Book Board
VCCAUX VAUX VCCO VCCO
VCCAUXRX AVCCAUX VTRX VT_RX
VCCAUXTX AVCCAUX VTTX VT_TX
VCCINT VCORE
Table 2: Platforms and Packages
Platform Package
ML324 FF1517
ML325 FF1704