
4. Enable the PCIe slot in the BIOS settings using the iDRAC GUI.
Note: iDRAC versions are different. After changing the PCIe settings in the slot using the BIOS in the
iDRAC GUI, you might also need to change the PCIe settings in the Console during the restart.
5. Perform a warm reboot on the host machine.
Flashing the Images Using the Program Flash
Application
The Zynq Ult MPSoC and Zynq Ult RFSoC can be programmed using the
Program Flash application, part of the Vivado
®
Design Suite. Make sure you have installed
Vivado before proceeding with the steps below.
1. Disable the PCIe slot in BIOS settings using the iDRAC GUI.
Appendix A: Programming the Devices Using JTAG
UG1495 (v1.0) December 17, 2021
T1 Telco Accelerator Card User Guide
47