
Figure 12: T1 Card with ADK in Server
The following instructions explain how to program the QSPIs for the Zynq
®
Ult™ MPSoC
(ZU19) and the Zynq Ult RFSoC (ZU21) directly.
Flashing the Images to ZU19
Zynq Ult MPSoC QSPI Using SDK
The following describes using the how to use the Xilinx tools to program the QSPIs on the T1
card.
Note: If you use this method, the Xilinx tools must be loaded on the server and it is necessary to connect
an ADK connector for the programming using JTAG.
Appendix A: Programming the Devices Using JTAG
UG1495 (v1.0) December 17, 2021
T1 Telco Accelerator Card User Guide
43