Xilinx Kintex UltraScale KCU1500 Скачать руководство пользователя страница 24

Страница: 24 / 51

Kintex UltraScale KCU1500 Acceleration Development Board

UG1234 (v2017.1) June 20, 2017

www.xilinx.com

Chapter 3:

Hardware Platform

• The

interconnect_aximm_host

instance of SmartConnect IP is customized to use 1

slave interface and 5 master interfaces; a 1x5 customization, where each interface uses

a 256-bit data path.

The

S00_AXI

slave interface is connected to the XDMA IP using AXI Register Slice

IP for partial reconfiguration isolation (see

Partial Reconfiguration Isolation

for

details), and is synchronous to the XDMA clock from PCIe link.

Four master interfaces,

M00_AXI

through

M03_AXI

, connect to the four 2x1

SmartConnect instances, which in turn each connect to one DDR4 IP instance and

are also synchronous to the XDMA clock from PCIe link.

The

M04_AXI

master interface connects to the AXI Performance Monitor IP for

application profiling support (see

Application Profiling and Other Features

for

details), and is synchronous to the dedicated AXI Performance Monitor clock.

The

interconnect_aximm_ddrmem0

through

interconnect_aximm_ddrmem3

instances of SmartConnect IP are each customized to use 2 slave interfaces and 1

master interface; 2x1 customizations.

The

S00_AXI

interface of each is connected to one of the master interfaces of the

interconnect_aximm_host

instance for host access to global memory, and are

synchronous to the XDMA clock from PCIe link, driving the

aclk1

port.

The

S01_AXI

interface of each is connected to one of the four master interfaces of

the SDAccel OpenCL Programmable Region IP (and therefore the Programmable

Region) for kernel access to global memory, and is synchronous to the kernel clock,

driving the

aclk2

port.

X-Ref Target - Figure 3-12

Figure 3-12:

AXI SmartConnect IP Instances in Reconfigurable Expanded Region Interconnect

Sub-Hierarchy

Send Feedback

Содержание Kintex UltraScale KCU1500




















































Результаты поиска

Содержание Kintex UltraScale KCU1500

Отзывы:

Бренды по названию

Популярные бренды

Xilinx Kintex UltraScale KCU1500, Руководство пользователя

Результаты поиска

Содержание Kintex UltraScale KCU1500

Отзывы:

Бренды по названию

Популярные бренды