Xhorse SK283, Руководство пользователя

Страница: 9 / 48

BMW TOOL User Manual
9
Ver: 1.1
4.
CAS/EWS Information
CAS/EWS Information main interface as picture
(PICTURE 4.1)
, support types as below:

OBDII - Auto Detect : Auto detection communication protocol, support KWP-
E6X…,
CAN bus 100Kbps, CAN bus 500Kbps. Other functions need choose manually

OBDII - KWP
– E6X, E7X, E9X, E81, E82, E87, E89
: Usually used in old cars with
CAS1, CAS2 and some CAS3

OBDII - KWP
– CAN bus 100Kbps
: This type will be use when your VVDI2 connect
to CAS with CAS PLUG or without gateway

OBDII - KWP
– CAN bus 500Kbps
: This type will be use when connect to car with
CAS3, CAS3+

OBDII - KWP
– CAN bus 500Kbps(F-Series)
: This type used CAS4 in BMW F
series

KLINE
– EWS3/EWS4
: When connect EWS with CAS PLUG, choose this type
(PICTURE 4.1)

Connect :
Connect to CAS system. Attention: EWS don’t support this (see special
note 1). After connect to CAS, there will display detail information in CAS
identification (PICTURE 4.2). When you choose Auto Detect, only connect support, it
will detect the connection type: KWP, CANBUS 100, CANBUS500. You must choose
another type before other operation

CAS ID : CAS identification number

CAS type: CAS type is very important, this type is detected by VVDI2-BMW,
he type detect incorrect
，
add new key may not work. Usually have the