Xhorse SK283, Руководство пользователя

Страница: 13 / 48

BMW TOOL User Manual
13
Ver: 1.1
position, prepare dealer key with VVDI
– BMW programmer

Prepare dealer key with ignition switch : After read key info success, select a key
position, prepare dealer key with ignition switch

Add Key : Add the new prepared key to CAS system. Most of the car, the new
prepared key can start engine directly without add key; there’s still a few car can’t
identification new key, at this situation you need add key to CAS system, key should
be placed in VVDI
– BMW programmer

Enable Key : Insert a working key to ignition switch, select key position which you
want enable, press button Enable Key. If there’s a key for this position, it will start
work again. Attention: Enable Key
don’t need to read key info

Disable Key : Insert a working key to ignition switch, select key position which you
want disable, press button Disable Key. If there’s a key for this position, it will stop
work, add key new at this position is also not work.
Attention: Disable Key don’t
need to read key info

Edit Key Info : After you read key info or load key info, select a specify key item
，
run
this operation to change detail item (PICTURE 5.2).
Attention: We don’t
recommend general user run this operation, the working key will stop work if
write error data
(PICTURE 5.2)

Repair Keyless Key
: If the keyless key doesn’t have smart function after start engine.
You can try this operation to fix it. Detail operation can follow (PICTURE 5.3).
Attention: you must have one un-keyless key and this key can start engine