Xhorse SK283, Руководство пользователя, Страница: 21 / 48

BMW TOOL User Manual
21
Ver: 1.1
(Remember: when you get window (PICTURE 5.5), you need choose Lost All Key )
Attention:
The key info can read directly if CAS isn’t ISTAP version. If CAS belongs
to ISTAP version, there will be update CAS flash window (PICTURE 5.17) for the first
time read key info. Upgrade CAS flash only need 10 minutes, after update flash turn
to step 5). If the upgrade progress failed by some reason, you can fix it with
Menu->CAS Repair->ISTAP4* version OBDII Repair. Repair with CAS ID (write
in step2)). Detail can be found in chapter 9 CAS Repair
4)
In
(PICTURE 5.1)
, use Save Key Info save the read key info
5)
In
(PICTURE 5.1)
, select Prepare dealer key with ignition switch , select key type
and pre-process the blank key, insert to ignition switch and wait complete. The
procedure will use try start method, if CAS belongs to ISTAP there will be at most 64
time try start, while the not ISTAP version have at most 16 times try start. Once the
engine start, turn to step 7). If you get failure here, you need unlock the key with key
info before next make dealer key.
6)
After success start engine, you will get window (PICTURE 5.18). Remember:
Don’t
take away the key from ignition switch. Synchronize DME-CAS (PICTURE 4.1) at
least 10 times. Once you get “Don’t synchronize when you have working key”
continue. If you got sync failed, don’t worry about this, the sync command is send. If
you don’t complete this procedure, your new key may not start engine for second
time
7)
Complete
(PICTURE 5.18)