Xhorse SK283, Руководство пользователя

Страница: 26 / 48

BMW TOOL User Manual
26
Ver: 1.1
6. FEM/BDC Key Learn
FEM/BDC using in BMW F series system after 2014. Support key info by OBDII, prepare
dealer key by OBDII, exchange modules,.etc functions.

Get Key Info : Read FEM/BDC system key information.

Programming FEM/BDC system : Program FEM/BDC system, Let it support reading
key info by OBDII

Prepare dealer key with ignition switch : Make working key with ignition switch

Exchange FEM/BDC : Replace vehicle module

Reset FEM to start : Reset the module start lock

Read ISN from original key : Read vehicle ISN from original key

Reset KM : Reset the module KM, in general after replace the module for restore
original KM

Enable Key : Insert one working key, then select key position that need to enable.
click enable key, After enable successful, this position key will work again. Note: If
only for enable key no need to get key info

Disable Key : Insert one working key, then select key position that need to disable.
the disabled key and insert working key can
’t be same one. After disable successful,
this position key will be not work any more, even add a new key at this position will be
not work. Note: If only for disable key no need to get key info

Emergncy switch ON : When all key lost, turn on ignition, let it can communicate

Erase Key : Delete the key from select key position.