Press and hold button for 3 seconds to enter the parameter setting mode, the buzzer will
beep and the LCD will display icon.
Press button to switch to the next parameter, then press or to increase or decrease
the setting value; or long press or to increase or decrease quickly.
Press and hold for 3 seconds to save settings and exit; or the controller will save and exit
setting mode after 15 seconds of inactivity.
See the flow chart below for quick parameter setting procedures:
4
2.3 Parameter Viewing
Press or to enter
parameter viewing mode
.
Press to view the parameters and relative values in ascending order:
TS
→
CD
→
HD
→
PT
→
AH
→
AL
→
CA. The parameter details are in
2.4 Parameter Settings.
Note: The controller will automatically exit viewing mode after 5 seconds of inactivity.
Press SET button
for 3s
Press SET button for
3s/ 15s of inactivity
Temperature
Set Value
Cooling
Differential
Temperature
Calibration
Temperature
Unit
Low
Alarm Limit
Heating
Differential
Protection Time
High
Alarm Limit
2.4 Parameter Settings
STC-1000Pro supports parameter settings by buttons.
Button Operation
