Xetawave Xeta9-E, Руководство пользователя

Страница: 61 / 68

58
3.10 Utilities
– RF Ping
This utility enables the direct testing of connectivity and link quality between a master
and a remote/slave radio and can be initiated from either side of the link. In order to
use this utility, enter the DeviceID for the radio on the far side of the link you wish to
test and press the “Start” button.
Note: If the unit has two installed RF modules it is
necessary to select which module to use for the test.
Once the test is initiated it will attempt four “pings” at the RF protocol level and each
successful ping will report signal and noise information for both the local and far side of
the link. With the utility it is possible to:

Verify that a remote/slave radio can be heard by the master radio

Verify a specific slave is connected to the master and able to communicate

Obtain link performace information at the master for a specific link