Xetawave Xeta9-E, Руководство пользователя

Страница: 11 / 68

8
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D OR non-
hazardous locations only.
WARNING – EXPLOSION HAZARD – Do not disconnect equipment unless power has been
removed or the area is known to be non-hazardous.
WARNING – EXPLOSION HAZARD - Substitution of components may impair suitability for
Class I, Division 2.
Input power shall be derived from a single Class 2 power source or equivalent.
The maximum operating temperature of the devices while subjected to the temperature
test at a 85°C surrounding air temperature is in accordance with the temperature class
of the table below:
Model T-code
Xeta9x9-E, Xeta9-E, Xeta9x3-E,
Xeta1-E, Xeta1x1-E, Xeta2-E,
Xeta2x1-E, Xeta2x2-E, Xeta3-E,
Xeta3x1-E, Xeta3x2-E, Xeta3x3-E,
Xeta4-E,
Xeta4x1-E, Xeta4x2-E,
Xeta4x3-E, Xeta4x4-E, Xeta9-E,
Xeta9x1-E, Xeta9x2-E, Xeta9x4-E.
T3C
Xeta9m-R, Xeta9m-T, Xeta9-SB,
Xeta9m-R4V, Xeta9m-T4V T4A
Xeta3m-R, Xeta1m-R, Xeta1m-T,
Xeta2m-R, Xeta2m-T, Xeta3m-T,
Xeta4m-T, Xeta4m-R T5
To maintain the unit within the temperature class listed above the transmit and receive
duty cycles must be set per the directions and table below. TX packet size must be
less
than or equal to the value shown. Rx packet size must be greater than or equal to the
value shown.
Model Number Tx Packet Size
<=
Rx Packet Size
>=
Approximate
Duty Cycle (%)
UL
Notifications