Xetawave Xeta9-E, Руководство пользователя

Страница: 42 / 68

39
display “checking...” for up to 15 seconds while configuration information is being
read from installed RF modules.
Radio 2
– if a second RF module is installed, this row will display information
about RF Module #w. If a second RF module is not installed, this value will
display “Not Present”.
MAC
– device MAC address which is set at the factory and cannot be changed.
Serial number
– unique identifier which is the same as the right most four byes
of the device’s MAC address.
Validate Settings
– this button appears whenever changes requiring validation
are pending. In order to prevent a user from inadvertently locking themselves out
of a radio, several connectivity-related changes require validation within a user
specified time-limit. If changes are not validated within the specified time-limit
the radio assumes connectivity with the user has been lost and will revert back to
its previous configuration.