Xerox X2 Скачать руководство пользователя

Страница: 43 / 75

Supplies

Replacing the waste ink bottle (con’t)

When to replace the waste ink bottle

The waste ink bottle should be replaced when the waste ink bottle is
filled with the waste ink.

* WASTE BOTTLE FULL
/NOT INSTALLED

SEE USER GUIDE
[ER: 4621]

For cases where the waste ink bottle is full, the LCD will display
the

Waste Bottle Full

message.

The amount of waste ink in the waste ink bottle is measured by
the waste ink bottle’s weight. The waste ink bottle tray acts as a
scale and must move freely to properly measure the amount of
waste ink in the bottle and prevent waste ink over-flow.

Caution:

If the printer continues to run without detecting the

change in the waste ink bottle’s weight, the waste ink bottle
could overflow and contaminate the printer and floor.

Replacement procedures

The steps to replace waste ink bottle are:

Procedures

1. Locate the waste ink bottle on the right rear side

of the printer.

2. Pick up the waste ink bottle and tilt it to remove

the bottle from the waste ink bottle tray.

3. Place the waste ink bottle into the disposable

plastic bag.

3. Properly dispose of the used waste ink bottle.

4. Set the new waste ink bottle on the waste ink

bottle tray. Ensure that the bottle is properly
seated on the tray before continuing.

Содержание X2












































































Результаты поиска

Содержание X2

Отзывы:

Похожие инструкции для X2

Бренды по названию

Популярные бренды

Xerox X2, Руководство пользователя

Результаты поиска

Содержание X2

Отзывы:

Похожие инструкции для X2

Бренды по названию

Популярные бренды