Installation and Setup
Installing Scan Drivers for Macintosh
1.
Insert the
Software and Documentation disc
into the appropriate drive on your computer.
2.
To view the .
dmg
file for your printer, double-click the disc icon on your desktop.
3.
Open the
Scan Installer.dmg
file, then navigate to the appropriate installer file for your operating
system.
4.
Open the
Scan Installer
package file.
5.
To acknowledge the warning and introductory messages, click
Continue
.
6.
To accept the license agreement, click
Continue
, then click
Agree
.
7.
Click
Continue
again.
8.
Enter your password, then click
OK
.
9.
If prompted to close other installations, click
Continue Installing
.
10.
To restart, click
Log Out
.
Installing Drivers and Utilities for UNIX and Linux
Xerox
®
Services for UNIX Systems is a two part installation process. It requires the installation of a
Xerox
®
Services for UNIX Systems code package and a printer support package. The Xerox
®
Services for
UNIX Systems code package must be installed before installing the printer support package.
Note:
You must have root or superuser privileges to perform the UNIX print driver installation on
your computer.
1.
At the printer, do the following:
a.
Verify that both the TCP/IP protocol and the proper connector are enabled.
b.
On the printer control panel, do one of the following for the IP address:
•
Allow the printer to set up a DHCP address.
•
Enter the IP address manually.
Xerox® WorkCentre® 3655 Multifunction Printer
41
User Guide
