![background image](http://html1.mh-extra.com/html/xerox/workcentre-c2424-dx/workcentre-c2424-dx_service-manual_4165430106.webp)
3-14
WorkCentre C2424 Service Manual
5,0XX.4x Errors - Y-Axis Sub-System Fault
5,001.41:
The drum turned one full revolution without seeing the drum home sensor
activate.
5,002.42:
The Y-Axis encoder is not working properly or the drum has stalled.
5,003.43:
There is a general problem with the Y-Axis sub-system.
5,0XX.6x Errors - Program Faults
5,001.63:
There is a problem with the Y-Axis sub-sytem.
5,005.67:
If not in the homless or idle state, the system faults out. Software fault.
5,006.68:
Software fault.
5,007.60:
Software fault.
5,008.61:
PostScript failed to fill the race buffer during imaging. Software fault.
5,009.62:
There were errors during imaging. Possible jets on/off outside of the
deadband area. Software fault.
a.
Reset NVRAM and retest.
b.
Ensure ground integrity for the system (see "Ensuring Ground Integrity" on
page 4-73).
c.
Replace the EEPROM chip.
d.
Reboot the system.
Troubleshooting Procedure
Step
Questions and Actions
Yes
No
1
1.
From the service diagnostic Monitor Menu,
run the Y-axis Encoder test.
2.
Did the test pass?
Go to Step 2.
Go to Step 3.
2
1.
Inspect the Y-axis motor connector.
2.
Is the wiring faulty?
Replace the
wiring harness
or Y-axis motor.
Go to Step 4.
3
1.
Inspect the encoder wiring harness.
2.
Is the wiring faulty?
Replace the
defective wiring.
Replace the
drum assembly.
4
1.
Run the Y-axis Drive test.
2.
Check the current values.
3.
Are the values within normal operating
range?
Go to Step 5.
Replace the
Y-axis motor.
5
1.
Run the Y-axis Belt Tension test.
2.
Check the current values.
3.
Are the values within the normal operating
range?
Go to Step 6.
Replace the
Y-axis belt.
6
1.
Run the Y-axis Motor test.
2.
Did the tests pass?
Replace the
drum assembly.
Replace the
Y-axis motor.
Содержание WorkCentre C2424/DX
