6
Security Features
WorkCentre 7425/7428/7435 has the following security features:
•
Hard Disk Data Overwrite
•
Hard Disk Data Encryption
•
User Authentication
•
System Administrator’s Security Management
•
Customer Engineer Operation Restriction
•
Security Audit Log
•
Internal Network data protection
•
FAX Flow Security
Settings for the Secure Operation
For the effective use of the security features, The System Administrator (Machine Administrator) must follow the
instructions below:
•
Passcode Entry from Control Panel Default [On].
•
The System Administrator Passcode Change the default passcode "1111" to another passcode of 9 or more
characters.
•
Maximum Login Attempts
Default [5] Times.
•
Service Rep. Restricted Operation
Set to [On], and then enter a passcode of 9 or more characters.
•
Overwrite Hard Disk
Set to [1 Overwrite] or [3 Overwrites].
•
Data Encryption
Default [On]
•
Scheduled Image Overwrite
Set to [Enabled].
•
Authentication
Set to [Login to Local Accounts]
•
Access Control
Set to [Locked] for Device Access and Service Access
•
Private Print
Set to [Save in Private Charge Print]
•
User Passcode Minimum Length
Set to [9] characters.
•
SMB
Set to [Disabled] for [NetBEUI]
•
SSL/TLS
Set to [Enabled]
•
IPSec
Set to [Enabled]
•
SNMP v1/v2c
Set to [Disabled]
•
SNMPv3
Set to [Enabled]
•
S/MIME
Set to [Enabled]
•
Audit Log
Set to [Enabled]
Important:
• The security will not be warranted if you do not correctly follow the above setting instructions.
• FAX Flow Security feature requires no special setting by System Administrator.
• When you set Data Encryption [On] again, enter an encryption key of 12 characters.