17
Set IPSec
Note: Before setting [Digital Signature] for [IKE Authentication Method], you will have to import an IPSec
certificate according to same procedure as "Configuring Machine Certificates" (3.4).
1.
Click [+] on the left of the [Security] folder on the [Properties] screen.
2.
Click [IPSec].
3.
Enable the [Protocol] by placing a check mark in the [Enabled] box.
Choose [Pre-Shared Key] setting (4 - 5) or [Digital Signature] setting (6 -11).
4.
Select [Pre-Shared Key] for IKE Authentication Method. This is to use the Shared Secret (between this device
and remote computers also possessing the secret).
5.
Enter a Pre-Shared Key in the [Shared Key] and [Verify Shared Key] box.
Please set the IPSec address successively.
6.
Click [Certificate Management] in the [Security] folder.
7.
Select [IPSec] for Certificate Purpose.
8.
Click the [Display the list] button, and check a desirable Certificate.
9.
Click the [Certificate Details] button.
10.
Click the [Use this certificate] button.
11.
On the [IPSec] screen, Select [Digital Signature] for IKE Authentication Method.
Please set the IPSec address successively.
Set IPSec Address
12.
Enter the IP Address in the [Specify Destination IPv4 Address] box on the [IPSec] screen.
13.
Enter the IP Address in the [Specify Destination Ipv6 Address] box.
14.
Select [Enabled] or [Disabled] from the [Communicate with Non-IPSec Device] dropdown list.
15.
Click the [Apply] button.
16.
Click the [Reboot Machine] button.
