Xerox WORKCENTRE 5030 Скачать руководство пользователя страница 36

Страница: 36 / 186

Page 3-4

Quick Reference Guide

Loading Paper

Open the required paper tray.

NOTE:

Paper trays 1 and 2 are fully

adjustable for all stock sizes between
8.5" x 5.5" to 11" x 17". Paper trays 3
and 4 are dedicated paper trays
which can be adjusted to hold either
8.5" x 11" or A4 long edge feed
paper only.

Load paper. Paper must not be
loaded above the fill line.

Close the tray.

NOTE:

For paper trays 1 and 2,

ensure the guides are just touching
the paper, otherwise the size
automatically detected may be
incorrect.

Select

[Confirm]

select

[Change Size]

and/or

[Change

Type and Color]

to reprogram the

tray if the paper size, type or color
has changed.

NOTE:

Ensure the Size, Type and

Color are all correct. For standard
copy paper the following should
apply:

Size

- 8.5" x 11"

Type

- Plain paper

Color

- White

Содержание WORKCENTRE 5030



























































































































































































Результаты поиска

Содержание WORKCENTRE 5030

Отзывы:

Xerox WORKCENTRE 5030, Краткое руководство пользователя, Страница: 36 / 186

Результаты поиска

Содержание WORKCENTRE 5030

Отзывы: