Xerox WORKCENTRE 5030 Скачать руководство пользователя страница 148

Страница: 148 / 186

Page 8-2

Quick Reference Guide

E-mail

This chapter contains information about the options available within

E-mail

NOTE:

E-mail is an optional feature which may not be available on your machine.

For information about the options available for each configuration, please refer to
the Product Overview chapter.

When enabled, scanned images can be sent as an e-mail attachment to a specified
e-mail recipient or recipients. To use scan to e-mail you must enter an SMTP
(Simple Mail Transfer Protocol) e-mail address, for example,
[email protected].

Access to the

E-mail

features is gained using the

Features

button on the control

panel. Use the

E-mail

tab to add and remove recipients and edit the subject line

Depending on the options enabled and how your machine has been configured, you
may have to select the

All Services

button in the top right-hand corner to access

E-mail

NOTE:

For the Copier/Printer configuration, E-mail is only supported via the Ad

Hoc E-mail options kit. Limited e-mail options will be available.

The tabs available for selecting

E-mail

features are:

E-mail

Image Adjustment

Output Format

Touch any of the top level buttons to select a feature. Multiple options can be
selected for each e-mail job if required.

Most feature screens include three buttons to confirm or cancel your choices.

The

Undo

button resets the current screen to the default values that were

displayed when the screen was opened.

The

Cancel

button resets the screen and returns to the previous screen.

The

Save

button saves the selections made and returns to the previous screen.

Содержание WORKCENTRE 5030



























































































































































































Результаты поиска

Содержание WORKCENTRE 5030

Отзывы:

Xerox WORKCENTRE 5030, Краткое руководство пользователя, Страница: 148 / 186

Результаты поиска

Содержание WORKCENTRE 5030

Отзывы: