Xerox WORKCENTRE 5030 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 186

Xerox WORKCENTRE 5030 Скачать руководство пользователя страница 35

Quick Reference Guide

Page 3-3

Getting Started

Power On or Off

If

Power Off

is selected and confirmed, the machine will begin a controlled power

down sequence.

NOTE:

The machine remains on for approximately 30 seconds before the power is

terminated.

If there are any jobs in the queue, a second pop-up screen will appear warning that
jobs in the queue will be deleted if the machine is powered off. Confirmation of this
screen will result in the deletion of any jobs in the queue during the power down
sequence.

If

Enter Power Save

is selected and confirmed, then the machine will immediately

enter the Power Saver Mode appropriate to its configuration. If there are any jobs in
the queue, a second pop-up screen is displayed.

To re-activate the machine when in this mode, touch a button on the touch screen
or control panel.

If

Quick Restart

is selected and confirmed then the machine will restart. A pop-up

screen will appear warning that any jobs in the queue will be deleted.

If

Cancel

is selected then the power down options will be cancelled and the

machine will be available for use.

1

To power ON:

¾

Press the

ON/OFF

switch. The

powering up process takes less
than 3 minutes.

NOTE:

Certain functions of the

machine, e.g. copying, will be
available before other functions e.g.
printing.

2

To power OFF:

¾

Press the

ON/OFF

switch. A

confirmation screen will appear
asking you to select a power
down option.

3

«
...
33
34
35
36
37
...
»

Содержание WORKCENTRE 5030



























































































































































































Отзывы:

Нет отзывов